SKCh4/100 panoramic real-time measuring receiver 900 MHz–40 GHz
Specifications | |
Parameter | Value |
Sampling rate and analog-to-digital converter resolution in 100 MHz bandwidth | 250 MHz, 16 bit |
Detector types | Peak, quasi-peak, RMS, averaging |
Deviation (offset) measurement | Up to IF band |
Display modes | Averaging, rewriting, histogram, min./max. hold, time-frequency diagram, (“waterfall”) |
Frequency scanning | Selectable start/stop frequency and step |
Demodulation modes | Amplitude modulation, frequency modulation, phase modulation, pulse modulation |
Gain control | Manual in 1 dB steps, 60 dB range |
Input level measurement error | max. |
Frequency measurement error of a sinusoidal signal | max. |
Spectrum width measurement error | Not more than 5% of the measured value, with a spectrum width of at least 1 kHz |
Measurement limits of pulse duration |
|
Measurement error of pulse duration at parameter value: Less than 1 µs 1 μs to 100 μs More than 100 μs |
max. |
Measurement limits of pulse repetition intervals | 100 ms |
Measurement error of pulse repetition interval at parameter value |
|
Number of free slots for integrated format devices |
|
Overall dimensions |
|
Weight, max |
|
Operating conditions | Temperature Relative air humidity Atmospheric pressure |
Storage temperature |
|
The parameter is indicated for normal climatic conditions
For a four-channel version of the receiver.
Nomenclature of products supplied
Item
Number of receiving channels
It is possible to change product parameters or develop a new product according to your technical requirements. The appearance of the product may differ from that presented on the website.
SKCh4/100 panoramic real-time measuring receiver provides reception, frequency and time selection of radio signals and measurement of their parameters in real time;
The wide bandwidth of real-time analysis, possibility of coherent reception and high quality of the input preselectors make it possible to use the receiver not only for solving metrological problems, but also for problems of signal search, radio engineering analysis and monitoring in difficult electromagnetic environment. The product can be used in complexes for direction finding of electrical radio products sources;
Channel configuration and frequency range of the receiver are determined by the number and ranges of the installed receiving channels;
Frequency domain panoramic scanning;
Time domain scanning;
Detection and analysis of the structure of phase-shift keyed signals in an automated mode;
Function of scanning the stored frequencies in the memory;
Ability to emulate additional digital receivers;
Industrial design (19”, 4U);
Automation of the measurement process and generation of reports;
Integrated software for radio signal analysis and classification.
| Minimum frequency | 900 MHz |
|---|---|
| Maximum frequency | 40 GHz |
