DAHP series high-frequency power amplifiers (instrumentation) 0.1 GHz to 50 GHz
Specification | |
Frequency range | 0,1 GHz – 50 GHz |
Form factor | 19’’ Rackmount, 2U, 464.9 mm |
Input and output VSWR | ≤ 2 |
Input/output Impedance | 50 Ohm |
Supply voltage | +12 V or 110 ÷ 240 V |
Dimensions | 483 mm x 465 mm x 89 mm |
control interface | RS-485 |
It is possible to change product parameters or develop a new product according to your technical requirements. The appearance of the product may differ from that presented on the website.
Recommended to be used as part of field formation systems when conducting studies of the electromagnetic compatibility of electronic equipment.
The devices are equipped with a built-in controllable input attenuator: 30 dB with 1 dB step.
The design of the device provides for a place to install a controlled L – band up-converter.
As required by the customer, it can be produced with an alternative frequency division.
Specification
Designation | Frequency range, GHz | Gain (typical), dB | Output power, W | Min. output power, mW | Level of suppression of harmonic components (2nd/3rd), dB |
DAHP 001010-40/10-0001 | 0,1 – 1,0 | 40 | 10 | 1 | 20/25 |
DAHP 001010-40/10-0002 | 0,9 – 4,0 | 40 | 10 | 1 | 20/25 |
DAHP 001010-40/10-0003 | 4,0 – 18,0 | 40 | 10 | 1 | 20/25 |
DAHP 001010-40/10-0004 | 8,0 – 18,0 | 40 | 20 | 1 | 20/25 |
DAHP 001010-40/10-0005 | 18,0 – 26,0 | 40 | 5 | 1 | 20/25 |
DAHP 001010-40/10-0006 | 26,0 – 40,0 | 40 | 5 | 1 | 20/25 |
DAHP 001010-40/10-0007 | 40,0 – 50,0 | 40 | 2,5 | 1 | 20/25 |
DAHP 001010-40/10-0008 | 1,0 – 2,0 | 40 | 100 | 1 | 20/25 |
DAHP 001010-40/10-0009 | 1,5 – 1,9 | 45 | 200 | 1 | 40/50 |
